That has been RSB Electrical bread and butter across the Phoenix Valley since 2001. The three repair calls we get most in any given Mesa week: GFCI outlets dead in the kitchen or bathroom, a breaker that will not reset, and fan or light fixture replacement.
We fix all of it, along with the longer tail of dead outlets, worn switches, damaged wiring, and sun-beaten exterior fixtures that Valley homes generate. If your problem turns out to be a symptom of something deeper, you are covered there too; finding hidden causes is our specialty, and the same team handles both.
One phone call, a real person, and two promises we have kept for twenty-five years: we will show up when we say we will, and we will keep you updated.
Why the Valley Calls RSB for Repairs
Repairs Done Right, In Customers’ Own Words
Public Google reviews from real RSB customers, quoted as written.
RSB vs. the chains, on everyday repairs
Repair Expertise: What Fixed Right Actually Means
What separates a repair that holds from one that comes back.
Why plugs fall out, and what the real fix is
Inside every outlet, spring-metal contacts grip the plug blades. Decades of use relax that grip, and once plugs start sliding out under their own weight the contacts also make a poor electrical connection, which generates heat. The fix is never a new plug or a bent blade; it is a quality replacement receptacle, wired and seated properly, and it costs less than the damage a hot, loose connection eventually does.
The five-dollar part is not the repair
Two outlets can look identical and differ completely in the metal inside: contact mass, clamp design, and how the conductors land. Builder-grade devices are why so many ten-year-old homes need outlet work already. We install spec-grade parts as our standard because a repair that lasts one year past its warranty is not a repair; it is a rental.
What lives behind a simple outlet swap
Box fill limits, conductor condition, back-stab connections that should become screw terminations, and grounds that need pigtails: the inside of the box decides whether a swap is simple, and a licensed eye reads it in seconds. This is also where past shortcuts surface, and correcting them mid-repair is exactly when it is cheapest.
Aluminum meets copper: the connection that has to be right
In 1969 to 1977 homes, every device repair can involve aluminum branch wiring, and joining aluminum to copper incorrectly is one of the most consequential mistakes in residential electrical work. We make those connections with the correct methods every time, and when a home aluminum wiring needs more than device-level care, our aluminum wiring service handles repairs and full rewiring.
Exterior repairs that survive the desert
A proper outdoor repair here means weather-resistant rated devices, in-use bubble covers that seal around cords, intact gaskets, and boxes that drain instead of collect. Doing it right adds minutes and a few dollars; doing it wrong schedules the next failure for the first monsoon of next summer.
Switch loops, three-ways, and the wiring behind controls
A switch that stopped working is occasionally a switch problem and frequently a wiring-logic problem, especially in three-way and four-way circuits that previous hands have modified. We diagnose the loop before replacing parts, which is why our switch repairs do not bounce.
Knowing when a repair is telling you something
The same circuit failing twice, devices that keep cooking, breakers that trip in patterns: repairs that repeat are messages from upstream. Our repair electricians are the same people who trace mystery problems for a living, so when your repair is a symptom you hear it straight, with evidence, and the deeper fix is one conversation away instead of a second company.
Electrical Repair Questions, Answered Straight
1.How much does an electrical repair cost?
We do not publish prices, but repairs are the most affordable work on our board, estimates are free, and you approve every number before work starts. Batching several small items into one visit is the best value in the trade.
2.Can you come today?
If it is dangerous, such as heat, a burning smell, or sparking, we treat it as an emergency around the clock. If it is inconvenient but safe, like a single dead outlet, we will schedule you for the next day at regular rates and tell you honestly which category you are in.
3.Is one dead outlet worth a service call?
Call us first, free: many dead outlets are a tripped GFCI in another room, and we solve those on the phone constantly. If it is genuinely dead, yes, it is worth fixing, both for the convenience and because dead outlets sometimes mark a failing connection worth catching early.
4.Why do plugs keep falling out of my outlets?
Worn internal contacts. The outlet has simply reached the end of its mechanical life, and loose contacts also run hot. Replacement with a quality device is quick, inexpensive, and the only real fix.
5.Can I just swap an outlet or switch myself?
Legally, in your own home, often yes. Wisely is another question: box conditions, aluminum wiring, and past shortcuts turn simple swaps complicated fast, DIY work that goes wrong costs double to redo more often than not, and insurers can deny claims for damage from unlicensed work. Our honest suggestion: spend the small service fee and watch how it should be done.
6.It worked fine for years. Why is it giving me problems now?
We hear this question more than any other, and the honest answer is almost always that the circuit has been overloaded for years and something finally gave. Wear is cumulative: connections loosen, contacts fatigue, and the load only ever grows. Years of working fine is not evidence the setup was right; sometimes it is just a long fuse burning down, and catching it at the first symptom is the cheap version of this story.
7.Why does my dimmer buzz, flicker, or eat bulbs?
Nearly always a mismatch between the dimmer and what it controls, and sometimes a failing device. Our standing advice runs simple: solid switches and quality dimmers matched to their fixtures, and a healthy skepticism toward stacking clever electronics on circuits that just need to work. We will fix the buzz and tell you plainly which setup will stop causing trouble.
8.Will you install a fixture or fan I bought myself?
Happily, and plenty of customers supply their own. Your hardware carries its manufacturer warranty; our labor carries the RSB one-year warranty either way.
9.Will you install the bargain fixture I found online?
If it carries a proper UL listing, yes, with the same care as anything else, and the labor-only warranty that comes with customer-supplied gear. Unlisted equipment is where we draw the line: we install UL-listed products only, because our name goes on the connection and your insurance depends on it.
10.Is any job too small?
No. Small repairs are the backbone of this company and the start of most of our longest customer relationships. Bring us the list; we will knock it out in one visit.
11.Do you do repairs for businesses?
Yes, under the same CR-11 commercial license: storefronts, restaurants, offices, and rental-turn punch lists for property managers, scheduled around your business hours.
12.My breaker keeps tripping after the repair. Now what?
Then the breaker is telling the truth: something upstream is wrong. That call moves from repair to diagnosis, and our troubleshooting service exists for exactly this, the same team, same visit if you want it, and the cause gets found rather than reset into next month.
13.What is your warranty on repairs?
One year on labor and materials from completion, with your invoice as proof. Customer-supplied fixtures are covered for our labor, and the hardware by its manufacturer.
